Deflection Elbows Eliminate Streamers at Leading U.S. Polyethylene Extruder
PISCATAWAY, NJ — All American Poly (AAP), is the largest privately-held polyethylene extruder in the US, producing approximately 123 million pounds (55.8 million kg) annually of plastic sheeting, liners, bags, and shrink-wrap products for food, building supply, industrial, agriculture, furniture and textile applications in three locations.Their largest plant in Piscataway, New Jersey operates 23 blown film extrusion lines and produces some 115 million pounds (52 million kg) yearly of 15 different polyethylene, or PE resins. These are compounded to meet customer requirements for density, gauge, surface characteristics, color, food contact, shrinkage, printing, UV resistance, anti-fog, flame retardancy and other properties.
Under the leadership of corporate project manager Ed Komoroski, AAP increased the system's capacity and reliability over the past decade, doubling the number of silos and adding multiple conveying lines. Before he joined the company, material was conveyed pneumatically from rail cars into the plant through flexible hose, and then through pneumatic piping and sweep elbows to holding bins and extruders.
The high volume conveying, together with PE's relatively low melt temperature of 248 to 266°F (120 to 130°C), created a problem with streamers (also known as angel hair and snake skins).
The heat generated by the PE impacting sweep elbows melted the product inside the conveying lines, forming streamers that jammed downstream equipment. This led to production tie-ups and demurrage charges while rail cars waited to be unloaded.
Upping transfer capacity, efficiency
At the heart of AAP’s vastly revised process is a series of plant-wide pneumatic vacuum conveying systems with over 108 bends and 128 separate lines. The lines transfer PE pellets from rail cars to eight exterior silos, then to interior holding bins, and ultimately to mixers on an upper level and extrusion lines below.
To avert PE degradation and production delays, Komoroski turned to HammerTek and the company’s 90-degree Smart Elbow® deflection elbows.
The elbows feature a bulb-like protrusion that extends beyond the 90 degree pathway, creating a ball of material suspended in air that rotates in the same direction as the airstream that powers it. This causes incoming pellets to be deflected around the bend without impacting and heating the elbow wall, thereby preventing elbow wear, material degradation, melting and plugging.
The elbows' short-radius design allowed installation between the rail car siding and the building, and from silos through an exterior wall into the plant at 90 degrees.
AAP has installed over 100 of the deflection elbows. Komoroski explains that AAP no longer experiences the maintenance issues caused by streamers, improving production, and notes that Smart Elbow units will be specified on all new vacuum lines added to meet increased demand.
All American Poly
40 Turner Place
Piscataway, NJ
www.allamericanpoly.com
(800) 526 3551
Click to enlarge
A complex of pneumatic pipelines transports polyethylene resins from rail cars to storage silos and into the plant for processing.
Click to enlarge
Approximately 123 million pounds (55.8 million kg) of PE is unloaded from railcars annually through pneumatic lines equipped with Smart Elbow® deflection elbows.
Click to enlarge
Silo-top view of rail siding and pneumatic conveying lines.
Click to enlarge
Smart Elbow® deflection elbows route material from rail cars to silos, and in turn, into the plant.
Click to enlarge
The short radius of Smart Elbow® deflection elbows allows routing of conveyor lines in the restricted space between rail cars and the plant.
Click to enlarge
The Smart Elbow® design prevents PE pellets from impacting/heating the elbow wall, melting and forming streamers.
Click to enlarge
Ed Komoroski doubled the number of silos and added multiple pneumatic conveying lines at All American Poly’s Piscataway, NJ plant.
Click to enlarge
A spherical vortex chamber protruding from the deflection elbow causes a loose ball of material to rotate in the same direction as the airstream that powers it, deflecting PE pellets around the bend without impacting and heating the elbow wall, preventing the formation of angel hair.
Click to enlarge
All American Poly previously generated large volumes of the angel hair shown here due to PE impacting and heating the outside radius of sweep elbows.
Click to enlarge
The largest privately-held polyethylene extruder in the US, All American Poly extrudes some 123 million pounds (55.8 million kg) annually.